uavcan and Slcan - Daytona Drone https://daytonadrone.com/community/uavcan-and-slcan/ Daytona Drone Club Discussion Board en-US Sun, 04 Oct 2026 15:21:12 +0000 wpForo 60 UAVCAN Learning https://daytonadrone.com/community/uavcan-and-slcan/11094bcf7e46bd25600b0b0cf4c1787c/ Thu, 03 Jun 2021 15:56:40 +0000 http://www.olliw.eu/2017/uavcan-for-hobbyists/#chapterslcanadapter

This is where the UAVCAN learning begins, where the engineering begins, where canbus takes wings

 

there are several projects like this that we will develop. https://www.rcgroups.com/forums/showpost.php?p=38657518&postcount=313

 

 

]]> uavcan and Slcan admin https://daytonadrone.com/community/uavcan-and-slcan/11094bcf7e46bd25600b0b0cf4c1787c/ This is a bitch to understand https://daytonadrone.com/community/uavcan-and-slcan/this-is-a-bitch-to-understand/ Sun, 30 May 2021 12:59:34 +0000 All attempts to communicate with the can bus have failed. I have tried 2 different control boards with different cpu. This will be my documented learning on WTF 
makes this can bus function and how to set it up.
This is a tool from https://forum.uavcan.org/t/uavcan-gui-tool-v1-0-0/1212, says it's legacy but gonna give it a try to try to get an idea of the bus functionality

https://github.com/UAVCAN/gui_tool

Equiptment so far has been

here3 gps antenna setup  (big time fail)

matek m8q gps module  ( trying to communicate with this on canbus)

 

]]> uavcan and Slcan admin https://daytonadrone.com/community/uavcan-and-slcan/this-is-a-bitch-to-understand/