Terms And Conditions   Please Read and Accept the Daytona Drone Club Terms to participate in the Forum

Notifications
Clear all

Establish Design and parts


(@admin)
Member Admin
Joined: 10 months ago
Posts: 132
Topic starter  

Daytona Drone Light class Drone built parts and build

Capture

 


Quote
(@admin)
Member Admin
Joined: 10 months ago
Posts: 132
Topic starter  

 

2@2x

lets review the specs of the selected drone for our light class

5
1
2
3
4
Screen Shot 2021 01 08 at 10.42.33 PM

 

The objective is to determine if the selected components are the best value. The ability to purchase an already assembled 
craft is valuable, the build process is a great learning experience but sometimes requires skills and tools most don't own.

ARRIS TS5823S transmitter  16.99.     comparable unit
Flycolor Raptor 390 Tower w/ F390 30A 4 in 1 ESC + F3 + OSD  69.99.     comparable unit
ARRIS S2205 2300KV Brushless Motor 49.98                                           comparable unit

 

 

This post was modified 10 months ago 3 times by admin

ReplyQuote
(@admin)
Member Admin
Joined: 10 months ago
Posts: 132
Topic starter  

evaluation 2

Screen Shot 2021 01 09 at 11.42.08 PM

Diagonal Wheelbase: 280mm                        35
Flight Controller: F4 Pro V3 flight Controller.  28.00
Motor: X2206 1500KV                                 60.00
ESC: BLHeli_S 30A                                      52
Camera: Foxeer HS1177 V2 camera.           28.00
FPV TX: 5.8G 48CH (0mw/25mw/100mw/200mw/400mw/600mw Switchable). 30
Antenna: 5.8G pagoda Antenna.                    8
gps bn880                                                  20                                                                  over 250 to build

This post was modified 10 months ago by admin

ReplyQuote
(@admin)
Member Admin
Joined: 10 months ago
Posts: 132
Topic starter  
44
45

ReplyQuote
(@admin)
Member Admin
Joined: 10 months ago
Posts: 132
Topic starter  

 

1

We have selected a example build to develop our Small Racing Class Around. The Protek 35. Follow our mods and parts selections as we work to develop our racer using the Protek 35 as the 
Small drone Racing Class design specification. Build your own or purchase a already available build. We have finally made a decision on the size and requirements, now we will refine the class and create 
groups to compete in

This post was modified 6 months ago by admin

ReplyQuote
Minimum 4 characters