Terms And Conditions   Please Read and Accept the Daytona Drone Club Terms to participate in the Forum

admin
@admin
Admin
Reputable Member
Joined: December 21, 2020 2:54 pm
Last seen: July 13, 2024 8:52 pm
Topics: 87 / Replies: 109
Topic
Replies: 1
Views: 9
Topic
Forum
Replies: 0
Views: 1
Reply
RE: Motors Sizing

But results are not always what's predicted we setup brotherhobby tornado 3115 1050kv motors and ran them with 6s batteries and melted the dron...

4 years ago
Reply
RE: Motors Sizing

This example for some reason uses 29.6 v 29.6 x 700 = 20,720 rpm, that is a 10in 3blade prop. lets put it to our 6s battery 22.2v x 7...

4 years ago
Reply
RE: Motors Sizing

lets look at some examples conmmercial hex drone (orange) 1860g/ 4.1lbs (w/o payload) 4S 6200mAh LiPo 720KV 3215 motor physical size (O...

4 years ago
Topic
Forum
Replies: 0
Views: 6
Reply
RE: Drone Build Rooster. A review and record of progress

Rooster 500mm body 6s battery 9in 3blade rotors enclosed blades 3d printed Mod/payload mounts

4 years ago
Forum
Topic
Reply
RE: Motors Sizing

Reviewing and motor selection Balance between rpm and torque when picking motor and propeller Points: Motors should be able to provide twice a...

4 years ago
Reply
RE: Motors Sizing

Ok to bring this up to date. the tornado motors just got so hot they melted the motor mount. 1 of the esc was also smoked. What was supposed to be a g...

4 years ago
Topic
Forum
Replies: 0
Views: 1
Topic
Replies: 0
Views: 1
Reply
Answer to: How are motors driven. 3 wire = 3 phase?

So-called three phase direct current brushless motors are really just three pole stepper motors and the esc’s are stepper drives while the flight cont...

4 years ago
Forum
ESC
Topic
Forum
ESC
Replies: 0
Views: 7
Page 4 / 14
Minimum 4 characters